Door Hardware
-
$419.45- Hager Trim and Auxiliary Series
- Push/Pull Bar Set
- Bars Mounted Back To Back
- 1/4"- 20 Thru-Bolt Type 4 Mounting
- Non-Reversible
- 3/8" X 1-1/4" Bar Stock
- Aluminum Material. Flat Bar Design
-
$787.95- Hager Trim and Auxiliary Series
- Push/Pull Bar Set
- Bars Mounted Back To Back
- 1/4"- 20 Thru-Bolt Type 4 Mounting
- Non-Reversible
- 3/8" X 1-1/4" Bar Stock
- Brass Material. Flat Bar Design
-
$766.10- Hager Trim and Auxiliary Series
- Push/Pull Bar Set
- Bars Mounted Back To Back
- 1/4"- 20 Thru-Bolt Type 4 Mounting
- Non-Reversible
- 3/8" X 1-1/4" Bar Stock
- Stainless Steel Material. Flat Bar Design
-
$698.68- Hager Trim and Auxiliary Series
- Push/Pull Bar Set
- Bars Mounted Back To Back
- 1/4"- 20 Thru-Bolt Type 4 Mounting
- Non-Reversible
- 3/8" X 1-1/4" Bar Stock
- Stainless Steel Material. Flat Bar Design
-
$787.95- Hager Trim and Auxiliary Series
- Push/Pull Bar Set
- Bars Mounted Back To Back
- 1/4"- 20 Thru-Bolt Type 4 Mounting
- Non-Reversible
- 3/8" X 1-1/4" Bar Stock
- Brass Material. Flat Bar Design
-
$42.23- Hager Trim and Auxiliary Series
- Half Round Wrought Door Pull
- Not Suitable For BTB Mounting
- 6" Center to Center
- 2" Projection
- Meets ANSI A156.6 for J401 Pulls
- Bronze Material. Half Round Design
-
$42.23- Hager Trim and Auxiliary Series
- Half Round Wrought Door Pull
- Not Suitable For BTB Mounting
- 6" Center to Center
- 2" Projection
- Meets ANSI A156.6 for J401 Pulls
- Brass Material. Half Round Design
-
$22.52- Hager Trim and Auxiliary Series
- Half Round Wrought Door Pull
- Not Suitable For BTB Mounting
- 6" Center to Center
- 2" Projection
- Meets ANSI A156.6 for J401 Pulls
- Aluminum Material. Half Round Design
-
$39.23- Hager Trim and Auxiliary Series
- Half Round Wrought Door Pull
- Not Suitable For BTB Mounting
- 6" Center to Center
- 2" Projection
- Meets ANSI A156.6 for J401 Pulls
- Brass Material. Half Round Design
-
$41.05- Hager Trim and Auxiliary Series
- Half Round Wrought Door Pull
- Not Suitable For BTB Mounting
- 6" Center to Center
- 2" Projection
- Meets ANSI A156.6 for J401 Pulls
- Stainless Steel Material. Half Round Design
-
$42.23- Hager Trim and Auxiliary Series
- Half Round Wrought Door Pull
- Not Suitable For BTB Mounting
- 6" Center to Center
- 2" Projection
- Meets ANSI A156.6 for J401 Pulls
- Brass Material. Half Round Design
-
$167.20- Hager Trim and Auxiliary Series
- Consists Of Two Round Offset Pulls To Be Installed Back To Back
- 6" Center to Center
- Type 7 Mounting
- 90 Degree Offset
- Available In Aluminum, Brass, Bronze And Stainless Steel
- Bronze Material. 90 Degree Design
-
$167.21- Hager Trim and Auxiliary Series
- Consists Of Two Round Offset Pulls To Be Installed Back To Back
- 6" Center to Center
- Type 7 Mounting
- 90 Degree Offset
- Available In Aluminum, Brass, Bronze And Stainless Steel
- Brass Material. 90 Degree Design
-
$116.48- Hager Trim and Auxiliary Series
- Consists Of Two Round Offset Pulls To Be Installed Back To Back
- 6" Center to Center
- Type 7 Mounting
- 90 Degree Offset
- Available In Aluminum, Brass, Bronze And Stainless Steel
- Aluminum Material. 90 Degree Design
-
$159.63- Hager Trim and Auxiliary Series
- Consists Of Two Round Offset Pulls To Be Installed Back To Back
- 6" Center to Center
- Type 7 Mounting
- 90 Degree Offset
- Available In Aluminum, Brass, Bronze And Stainless Steel
- Brass Material. 90 Degree Design
-
$169.10- Hager Trim and Auxiliary Series
- Consists Of Two Round Offset Pulls To Be Installed Back To Back
- 6" Center to Center
- Type 7 Mounting
- 90 Degree Offset
- Available In Aluminum, Brass, Bronze And Stainless Steel
- Stainless Steel Material. 90 Degree Design
-
$159.62- Hager Trim and Auxiliary Series
- Consists Of Two Round Offset Pulls To Be Installed Back To Back
- 6" Center to Center
- Type 7 Mounting
- 90 Degree Offset
- Available In Aluminum, Brass, Bronze And Stainless Steel
- Brass Material. 90 Degree Design
-
$37.41- Hager Trim and Auxiliary Series
- Rectangular Wrought Door Pull
- 6" Center to Center
- May Be Combined With Plate To Make Pull Plate
- Includes (2) 1/4" - 20 Thru Bolts With Finish Washers
- Not Suitable for BTB Mounting
- Meets ANSI A156.6 for J401 Pulls
- Bronze Material. Rectangular Design
-
$37.41- Hager Trim and Auxiliary Series
- Rectangular Wrought Door Pull
- 6" Center to Center
- May Be Combined With Plate To Make Pull Plate
- Includes (2) 1/4" - 20 Thru Bolts With Finish Washers
- Not Suitable for BTB Mounting
- Meets ANSI A156.6 for J401 Pulls
- Brass Material. Rectangular Design
-
$19.09- Hager Trim and Auxiliary Series
- Rectangular Wrought Door Pull
- 6" Center to Center
- May Be Combined With Plate To Make Pull Plate
- Includes (2) 1/4" - 20 Thru Bolts With Finish Washers
- Not Suitable for BTB Mounting
- Meets ANSI A156.6 for J401 Pulls
- Aluminum Material. Rectangular Design